Plasma TV Stands
Plasma TV stands holds a plasma TV upright on an entertainment center or some other piece of furniture.
They are a necessity. These TV’s are non capable to stand on their own they ar very thin and usually does non have legs or any other devices to hold them upright. It is one of the best options, there ar also plasma wall mounts but if mounting your TV on the wall is just non an option than plasma television stands is the only way to go. Plasma television stands come in three types; there are stationary plasma stands that are simple and the least expensive. There is a swivel plasma stand that move from side to side and there are rotating TV stands that turn three hundred and sixty degrees these are the most expensive. There are some that are made to sit on pieces of furniture and there are some that ar pieces of furniture. Some have storage features and look much like conventional entertainment center. The TV is typically suspended from two arms that will hold the TV upright.
The cost of the stands is entirely dependent on the type. The stationary type stands is the least expensive. It does not move at all and is usually quite simple. The kinds that swivel from side to side are a bit more expensive and the most expensive of them will allow the TV to swivel from side to side, move up and down and turn three hundred and sixty degrees. TV stands range in price from one hundred to close to one thousand dollars.
Where to Purchase Them
They can be purchased where electronics is sold, furniture stores, discount warehouse stores and specialty stores.
Plasma TV stands ar a definite mustiness if your TV is not going to be hung on a wall. There are some really nice options; one of the most important considerations is to be sure the stands that are being looked at can hold the weight. Plasma TV’s ar very heavy and have glass fronts, being sure they can be supported is very important. Cost should always be considered and looking at client reviews is also a good idea.
Article Source: http://EzineArticles.com/?expert=Christopher_Wrighton
Cheetah Mounts APDAM2B Plasma LCD Flat Screen TV Articulating Full Motion Dual Arm Wall Mount Bracket for 32 to 55-Inch Displays Up To 165Lbs (Black)
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20-Inch from the wall yet fold to less than 5-Inch. Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55-Inch and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19-Inch wide and has wide slots making it easy to mount into standard 16-Inch studs even if they are not exactly 16-Inch apart. Thus, the arms may be visible on the sides of 32-Inch units. The universal design will fit any display with a hole pattern up to 26.3-Inch wide and 18-Inch tall. The wall plate is 1/8-Inch thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent inadvertent liftoff of the display. Installation instructions and ironware included.
- Very Substantial Mount, Over 30Lbs Of Steel
- Dual Arms Extend To Over 20″ Fold To Less Than 5″
- 120 Degree Swivel, +-15 Degree Tilt
- Display Up TO 180Lbs
- Installation Manual And All Hardware Included